How to fix Windows was unable to connect to wifi – Every time you make a wifi connection at a cafe, office, or your own home, the password will normally be saved on the device you are using to connect.
The cause of “Windows was unable to connect to wifi” error
- The administrator has changed the Wifi you are using. When you connect to Wifi with the old password, you will get this error.
- The modem has not been reset for a long time, leading to problems with wifi broadcasting.
- Wifi has too many users, leading to not being able to allocate IP.
How to fix “Windows was unable to connect”
However, you may still see the error “Windows was unable to connect to… + network” for many reasons. So how to fix this error, please refer to the ways below!
Restart Wifi modem
Maybe your Wifi transmitter has been working for a long time, leading to overheating and overloading. It can also be caused by you leaving it in a location that is not cool, humid or too hot to cause damage.
Press the power button on the back of the Modem / unplug the power and wait 15 seconds to a minute and then turn on/power on the device again.
Using Windows Network Diagnostics
If you are having problems with Windows 7 or 8.1, right-click the Internet icon in the bottom right corner. Then, click on Troubleshooting Problems.
Fix Windows was unable to connect to by Disable/Enable the Wireless Card
Turning off and reopening Wireless Card Driver on the computer can also help you fix this error. You can do as follows:
Step 1: First, right-click on the wifi icon >> select Properties.
Step 2: At the newly opened window interface, select Device Manager >> Select the Network Drivers on the right >> Select right-click the Wireless Network Adapter icon >> Click Disable.
Step 3: Wait about 40 seconds then select the right mouse button and select Enable.
Release/Renew IP Address
You can get this error because your computer uses wifi with too many people making the transmitter unable to provide any more wifi. Then, do the following:
Please open CMD by going to Start >> Type CMD in the search box. Press Enter.
At the CMD interface that appears, type or copy the following two lines of command:
Fix Windows was unable to connect to by Remove network
The cause of the Windows was unable to connect to error is that your computer automatically catches Wifi with the old password, but that password has been changed. So you need to enter a new password for that Wifi.
Step 1: Right-click the Wifi icon in the right corner of the computer screen -> select Open Network and Sharing Center.
Step 2: Go to Manage Wireless Network => right-click on the Wifi you want to reset the password for => Remove Network.
Step 3: Go back to the Wifi icon in the right corner of the screen, you will see the Wifi you just removed appears. Click and enter the new password for Wifi is OK.
Turn on Network Discovery
Make sure you have it turned on. To check, you can go to Control Panel >> Select the Network and Sharing Center icon.
In the left pane, select Change Advanced Sharing Settings. Now scroll down and verify that the Turn on network discovery button is selected. If not, choose Turn off network discovery… then Save.
Reinstall Wifi drivers to fix Windows was unable to connect to
Some other cases of faulty or old wifi drivers also lead to the above situation, please install another wifi driver or update a new wifi driver to fix the Windows was unable to connect to… Wifi.
See more: How To Update Drivers On Windows 10
So you already know how to fix “Windows was unable to connect to this network” as above, right? Do you have success with the above tips or if you still have any other problems while doing so, don’t forget to share with us in the comments below!