Blue screen error is considered one of the errors that most Windows computer users encounter on a PC or Laptop. When you fail this error, you may feel “insecure” and mistakenly think your computer is badly damaged.
So really the cause of the Blue Screen of Death error and how to fix this “deadly” blue screen error, please refer to the summary content below!
How To Fix Blue Screen On Windows 10
Clean HDD or Ram
Blue screen error caused by Ram is considered a very common error when your computer is operating for a long time without being cleaned.
Fix: For this reason, the fix is quite simple; you need to carefully remove the Ram bars and then use the Gum to rub lightly on the copper surface of the Ram. Then insert Ram and check the results.
Note: When attaching the Ram bar, you need to be careful and connect Ram’s correct direction to the MainBoard.
Use Gom to clean Ram.
Take the eraser of the pencil to clean Ram.
The blue screen error caused by HDD may be because you chose the wrong hard drive connection standard in BIOS.
Fix: The fix is also quite simple when the computer starts to boot, choose F12 or Delete depending on the PC or Laptop to enter the BIOS. Then go to the Boot tab, continue to select SATA Configuration, at Sata mode selection if it is IDE, switch to AHCI or vice versa.
This is also a relatively common cause of a computer with a blue screen error. After installing additional software or updating a new Driver, the computer continuously displays a blue screen after restarting.
Fix: To fix this error, you need to go to Safe Mode of Windows and remove the software just installed. You can also see the article on how to scratch Safe Mode on Windows that I recently shared in detail.
For the software, you can refer to how to remove Control Panel’s software through the article here.
For newly installed Drivers, right-click the MyComputer icon in Desktop Safe Mode >> Manage.
Then, proceed to Uninstall (remove) the newly installed Driver.
After the uninstallation is complete, find the new Driver version by going to the manufacturer’s home page or using the driver auto-updating software such as Wan Driver, Driver Pack, … to install for your computer.
After installing some software on your computer, your computer will be blue screen and unable to access the restart’s Desktop interface. For this case, force you to enter Safe Mode of Windows and perform the software’s removal from the computer system.
Suppose you can reboot into the Desktop interface. In that case, you should use anti-virus software for Windows to limit malware that damages Windows 7, Windows 8.1 and Windows 10 as well as causing unexpected errors.
Above are the causes and how to fix the blue screen error on a PC that often occurs that I have gathered from the Internet and have some personal experience. In case you still cannot fix this error through the above methods, please bring your device to a repair centre and ask them to help you!
However, if you want to fix your computer’s errors yourself, then refer to the above methods will be very helpful because you know somewhere you will be able to fix this for your friends’ computers or your own family. In addition, if you have any questions or need any suggestions on how to fix the blue screen error on your PC & Laptop, please leave your comment in the section below!