Currently, the need to create a USB install Windows 10 is increasingly popular. That’s because USB is very convenient and can be carried anywhere, anytime. However, to install Windows 10 from USB, we must first install Windows 10 with the ISO file or create a USB to install Windows 10 with Rufus.
In this article, ticswipe.com will help you create Windows 10 Bootable USB with professional software and the best today.
Requirements to Create Windows 10 Bootable USB
- Windows 10 ISO file: you can download it from the Microsoft homepage or other Windows 10 ISO file download sites.
- USB: 6GB – 8GB capacity; there is no data in USB for convenience when creating USB boot Windows 10 UEFI.
- The software to create Windows 10 USB Boot, in this article, I will guide you through creating Windows 10 bootable USB with Rufus 3.5 and Windows USB/DVD Download Tool.
How to Create Windows 10 Bootable USB
There is much different software to create USB bootable Windows 10. Can list a few tools such as Yumi, FlashBoot, Universal USB Installer, RMPrepUSB… But more prominent is the tool Rufus, Windows USB/DVD Download Tool and Media Creation Tool.
How To Create Windows 10 Bootable USB
Using Windows USB/DVD Download Tool
First, to be able to install Win 10 with an ISO file, you need to download Windows USB/DVD Download Tool at Microsoft homepage.
Step 1: Next, to be able to install Windows 10 bootable USB. Open the Windows USB/DVD Download Tool installed above. Select Browser to navigate to the downloaded Windows 10 ISO file. Then click Next.
Step 2: Choose the type of storage that is USB or DVD. In this article, I only mention the USB storage form, so you choose a USB Device.
Step 3: Next, we will choose a USB to install Windows 10. Next, click Begin copying. Then if a small message pops up asking you to Erase the USB Device. If you agree, the system will erase all that is in your USB. Therefore, if you have stored important documents, you should move to another place to leave the USB completely blank.
Step 4: After choosing Begin copying. The application will automatically create bootable USB Windows 10 into your USB.
Step 5: After 5 to 10 minutes (depending on the speed of the device), the process of creating a Windows 10 bootable USB with ISO file has been completed.
Using Rufus 3.5
The special thing when creating a Windows 10 installation USB with Rufus 3.5 or higher is that you do not need to download the Windows ISO file anymore. Still, it can download directly on the Rufus application. One thing that previous versions of Rufus did not have.
You download the software Rufus 3.5 here: Download the latest Rufus.
Here we will enter the details of creating a Windows 10 installation USB with UEFI standard Rufus.
Step 1: Launch the installed Rufus 3.5 application. At the program’s main interface, you change the Partition scheme to GPT and Target System to UEFI (non CSM) to create a USB Windows 10 UEFI standard installation.
Step 2: We will choose the USB that creates a bootable USB with Rufus. Choose to create USB install windows 10 by Rufus from Boot Selection (if any) and select Start is done, click the arrow button to the right of the word Select to convert to Download to choose the Windows 10 version for USB.
Step 3: Click on the word DOWNLOAD and the Windows 10 version selection interface will appear. You need to select the version you want, click DOWNLOAD and select the location to save the Windows ISO file you created.
Step 4: After the Download is complete, choose Start. So you have created a bootable USB with Rufus using the software successfully.
Using Media Creation Tool
Suppose you are using a system using the UEFI standard. In that case, you can use the Media Creation Tool application to create a bootable USB to facilitate the Windows 10 operating system installation.
First, to create a bootable device, connect USB (preferably 8GB) and follow the steps below:
Step 1: Visit the official Microsoft download page. Under “Create Windows 10 installation media“, click the Download tool now button to download the installer to your computer.
Step 2: Double-click the downloaded MediaCreationToolxxxx.exe file to proceed with the installation process.
Step 3: After some time, click Accept to accept the terms of Microsoft.
Step 4: Check the option Create installation media (USB flash drive, DVD, or ISO file) for another PC. Then click Next.
Step 5: Turn off the mark Use the recommended options for this PC (if any). Then select the language, 64-bit or 32-bit Windows 10 version. Then click Next.
Bonus: If you need to install Windows 10 on multiple devices, as well as depending on the machine, you will install the 32-bit or 64-bit version, select Both in the drop-down menu of the Architecture section.
Step 6: Then there will be two options here:
- USB flash drive: Create USB Boot Windows 10 with the same operating system and version selected in step 5.
- ISO file: Download the ISO file containing the original Windows 10 settings selected in step 5. Then use Windows USB/DVD Download Tool or Rufus 3.5 to create the USB Boot.
So we will check the “USB flash drive” and click Next.
Step 7: Finally, you will select the connected USB device to complete the USB Boot creation process (If you do not see it, check the USB connection and click Refresh drive list). Then click Next.
Step 8: After the process is completed, click the Finish button. And try Install Windows 10 using USB right away.
So you already know how to create Windows 10 bootable USB as above, right? Do you have success with the above tips or if you still have any other problems while doing so, don’t forget to share with us in the comments below!