How To Fix Dxgkrnl.sys Blue Screen Error on Windows 10 – While using Windows 10 system, you may face a special blue screen of death caused by the driver software ‘dxgkrnl.sys’. This issue is caused by a corrupt or unstable graphics driver on your system. Don’t worry, try some of the solutions below.
Normally, if you get this error, your computer will restart continuously. If the computer cannot access Win as normal, you need to run the “Automatic Repair” troubleshooter.
Step 1. Turn off your computer.
Step 2. Then press the power button to boot your system.
Step 3. Next, when your system boots, as soon as you see the manufacturer’s logo, press and hold the power button again to force shut down the system.
Step 4. Repeat steps 2 and 3 for 2-3 more times, you will then be taken to the repair screen.
How to Fix Dxgkrnl.sys Blue Screen on Windows 10
Update Graphics Driver
A faulty graphics driver causes this issue. Installing the latest update can resolve this issue.
Step 1. In the Automatic Repair screen, click the Advanced Options.
Step 2. On the next screen, you need to click Troubleshoot.
Step 3. When the troubleshooting window appears, click Advanced options.
Step 4. Next, click Startup Settings.
Step 5. Continue to click on Restart in the lower-left corner bring Win 10 computer to the Startup settings window.
Step 6. It would help if you pressed ‘F5’ key to enter Enable Safe mode with Networking. As soon as you press that key, your system will boot into safe mode.
Step 7. Once your computer boots into Safe mode, right-click the Start menu, then choose Device Manager.
Step 8. Click the drop-down list of Display adapters => then right-click on the graphics card and select Update driver.
Step 9. For Windows to find the driver itself, click Search automatically for an updated driver. Now, wait for Windows to download and install the latest graphics driver. This should fix your problem.
Install Graphics Driver
Step 1. Find Graphics Driver by the brand to download the latest NVIDIA Driver, follow the following link: http://www.nvidia.com/Download/index.aspx
For Intel HD Graphics: https://www.intel.com/content/www/us/en/support/products/80939/graphics-drivers.html
Step 2. In the manufacturer’s website interface, select the parameter by your graphic product, and then click Search.
Step 3. On the following screen, you will see that the latest driver has appeared. Click Download.
Step 4. Now run the downloaded file by double-clicking on it.
Step 5. In the driver installation interface, select NVIDIA Graphics Driver and GeForce Experience. Then click Agree and continue.
Step 6. On the next screen, choose Express (Recommended) and then click Next.
Step 7. Installation may take 5 minutes. Once done, you can close the installation window again.
Step 8. Finally, restart your computer.
Disable NVIDIA Surround setting
NVIDIA Surround controls synchronization between multiple monitors.
Step 1. Use the Win + S keyboard shortcut and search for NVIDIA Control Panel. Then you need to click on the displayed result to access it.
Step 2. When the NVIDIA control panel opens, click on 3D settings to expand it. Then click Configure Surround, PhysX.
Step 3. On the right side of the Surround configuration section, deselect Span displays with Surround then click Apply.
Step 4. Finally, reboot your system. Additional tips NVIDIA Surround manages your multiple monitors. If the above doesn’t fix the problem, then try connecting the computer to a single monitor, then try again.
Disable SLI in NVIDIA Settings
If you are using multiple GPUs on your device then this error could be caused by SLI technology.
Step 1. Open NVIDIA Control Panel according to the instructions above.
Step 2. In the left options column, click 3D Settings> then click on Set SLI Configuration.
Step 3. Next, choose Do not use SLI technology and then click Apply.
Step 4. Finally, restart your computer and check the results.
If the problem is still bothering you can consider running the DISM command to repair the corrupted system components on Microsoft Windows.
Step 1. Click on start Menu => type cmd => then choose Run as administrator to run Command Prompt with Admin.
Step 2. Execute this set of code. To do so, copy and paste the first code and press Enter. Do the same for the other two.
Dism / Online / Cleanup-Image / CheckHealth Dism / Online / Cleanup-Image / ScanHealth Dism / Online / Cleanup-Image / RestoreHealth
Step 3. Close the command prompt and restart your computer.
If the methods above fail to fix the dxgkrnl sys windows 10 blue screen of death error, it may be due to faulty hardware, incompatibility or a problem installed on your PC. If you know any better solution, then please share it, so everyone knows!